2002 ford explorer sport trac valve cover gasket replacement

Table of Contents Show On average, the cost for a Ford Explorer Sport Trac Valve Cover Gasket Replacement is $366 with $138 for parts and $228 for labor. Prices may vary depending on your location. What is a valve cover gasket and how does it work? When to consider replacing a valve cover gasket? How do mechanics replace a valve cover gasket? Is it safe to drive with a valve cover gasket problem? When replacing a valve cover gasket keep in mind: Recent articles & questions How much does it cost to replace a gasket cover? How many miles can a Ford Explorer Sport Trac last? What are the problems with Ford Explorer Sport Trac? Log Into My Account Create Account Forgot Password Create Password Please enter your email address and the security code exactly as shown in the image, then press "Submit" to create an account. Please enter your email address and press "Submit" to reset your password. Please create a password for your account. Please set a password for your account. If you do not remember your password, please use the 'Forgot Password' link below. Email Address Security Code Password New Password Confirm New Password Create Account      Forgot Password  Keep Me Logged In If you do not have an account but would like to check the status of an order, request a change, or report a problem with an order or shipment, please go to our Order Status & Returns page.

Enter the characters you see below

Sorry, we just need to make sure you're not a robot. For best results, please make sure your browser is accepting cookies.

Type the characters you see in this image:

Try different image

Conditions of Use Privacy Policy

© 1996-2014, Amazon.com, Inc. or its affiliates

We're offline for a tune-up, we'll be up and running smoothly very soon.

In the meantime, here are some other options available:

Visit an
Advance Auto Parts store

Sign up for
SpeedPerks Rewards

View us on Social Media
Facebook/Twitter/Blog

We appreciate your patience – for your next visit:

15% off

your next purchase.
Some exclusions apply.

Enter coupon code: in shopping cart.

We look forward to serving you,
The Advance Team

Estimate price near me

Included for free with this service

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Ford Explorer Sport Trac Valve Cover Gasket Replacement is $366 with $138 for parts and $228 for labor. Prices may vary depending on your location.

Show example Ford Explorer Sport Trac Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

• Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
• Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
• Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

• Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
• Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
• Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
• Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
• Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

• The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
• Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
• Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
• Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Recent articles & questions

A Buyer’s Guide to the 2012 Nissan 370Z

Whether Whether you opt for the roadster or the coupe in the 2012 Nissan 370Z, you will be choosing a machine that will provide outstanding performance and a luxurious interior that you won’t be able to tear yourself away from....

How Long Does an Ambient Temperature Sensor (Switch) Last?

In In many late-model vehicles, the need to manually adjust heat and air conditioning has been eliminated. You can actually set your car’s computer to regulate the cooling and heating process based on the temperature at which you feel most...

Diagnostic code p2096 what does it mean and what steps do i take to fix

Hey there. The code could have been caused by an exhaust leak, clogged injectors (https://www.yourmechanic.com/services/fuel-injector-replacement), or intake vacuum leak (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-vacuum-leak). If problems just happened to start after getting fuel, then you may have a purge valve leaking excessive fumes into...

Car shakes when idle

Any improperly sealed or mounted airbox may affect the reading of the mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) resulting in the shaking or rough idle you are describing. I would suggest properly securing the airbox and see if that does not...

Replace starter good battery new battery cables but not getting proper power to the starter

It sounds like what you are describing may be related to a faulty starter relay or some faulty wiring that may not be producing a proper connection to the starter. The starter relay (https://www.yourmechanic.com/services/starter-relay-replacement) directs power from the battery to...

1. Home
2. Estimates
3. Ford
4. Explorer Sport Trac
5. Valve Cover Gasket Replacement

How much does it cost to replace a gasket cover?

How many miles can a Ford Explorer Sport Trac last?

What are the problems with Ford Explorer Sport Trac?