Whirlpool side by side refrigerator temperature settings

Document

Side-by-Side Refrigerator Quick Start Guide

OPERATING INSTRUCTIONS

IMPORTANT: Before operating this appliance, make sure it has been properly installed according to the appliance’s Owner’s Manual.
For your convenience, your refrigerator controls are preset at the factory. When you first install your refrigerator, make sure that the controls are still present. The refrigerator and freezer controls should be set to the “mid-settings.”

REFRIGERATOR

IMPORTANT: The refrigerator control adjusts the refrigerator compartment temperature. Every click on the “Temp Setting” button makes the refrigerator compartment colder (LED indicators on in 1 snowflake is Less Cold/LED indicators on in 2, 3, or 4 snowflakes is colder/All LED indicators on is coldest), once you get to the last level, the system will go back to the initial level.

FREEZER

The freezer control adjusts the freezer compartment temperature. Settings to the front of the mid-setting make the temperature less cold. Settings to the back of the mid-setting make the temperature colder.
Wait 24 hours before you put food into the refrigerator. If you add food before the refrigerator has cooled completely, your food may spoil.

NOTE: Adjusting the refrigerator and freezer controls to a higher (colder) than recommended setting will not cool the compartments any faster.

TEMPERATURE SETPOINTS

Give the refrigerator time to cool down completely before adding food. It is best to wait 24 hours before you put food into the refrigerator. The settings indicated in the previous section should be correct for normal household refrigerator usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is
firm.
If you need to adjust temperatures in the refrigerator or freezer, use the settings listed in the chart below as a guide. Wait at least 24 hours between adjustments.

Online Ordering Information
For detailed installation instruction and maintenance information, winter storage, and transportation tips, please see the Owner’s Manual included with your appliance.
For information on any of the following items, a full-cycle guide, detailed product dimensions, or for complete instructions for use and installation, please visit https://www.whirlpool.com/owners, or in Canada https://www.whirlpool.ca/owners. This may save you the cost of a service call. However, if you need to contact us, use the information listed below for the appropriate region.

SAVE THESE INSTRUCTIONS

Documents / Resources

Document

Side-by-Side Refrigerator Quick Start Guide

OPERATING INSTRUCTIONS

IMPORTANT: Before operating this appliance, make sure it has been properly installed according to the appliance’s Owner’s Manual.
NOTE: The display screen on the dispenser control panel will turn off automatically and enter “sleep” mode when the control buttons and dispenser pads have not been used for 2 minutes or more. While in “sleep” mode, the first press of a control button will only reactivate the display screen without changing any settings.
Touch any control button on the dispenser panel to activate the display screen. The home screen will appear as shown.

For your convenience, your refrigerator and freezer controls are preset at the factory. When you first install your refrigerator, make sure that the both the refrigerator and freezer controls are still set to the “mid-setting.” This will be indicated with three illuminated bars.

IMPORTANT:

• Wait 24 hours before you put food into the refrigerator. If you add food before the refrigerator has cooled completely, your food may spoil.
  NOTE: Adjusting the set points to a colder than recommended setting will not cool the compartments any faster.
• If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls.
• The preset settings should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.
• Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made.

TEMPERATURE SETPOINTS

The setpoint range for the refrigerator and freezer is “1 bar” (least cold) to “5 bars” (coldest).
When adjusting temperature set points, use the following chart as a guide.

Refrigerator Control:

• Press Refrigerator Temp to view the current setpoint for the refrigerator.
• Press Refrigerator Temp again to adjust the set point.
  The setting will increase by 1 bar with each press of the button, returning to 1 bar after reaching 5.
  After 2 minutes of inactivity, any changes will be saved and the display will return to the home screen.

Freezer Control:

• Press Freezer Temp to view the current set point for the freezer.
• Press Freezer Temp again to adjust the set point. The setting will increase by 1 bar with each press of the button, returning to 1 bar after reaching 5.
  After 2 minutes of inactivity, any changes will be saved and the display will return to the home screen.

DISPENSER LIGHT

When you use the dispenser, the light will automatically turn on. If you want the light to be on continuously, you may turn on the light.
Press Light again to turn off the dispenser light.

The dispenser lights are LEDs that cannot be changed. If it appears that your dispenser lights are not working, see online “Troubleshooting” for more information.

DISPENSER LOCK

The dispenser can be turned off for easy cleaning or to avoid unintentional dispensing by small children and pets.
NOTE: The lock feature does not shut off power to the refrigerator, to the ice maker, or to the dispenser light. It simply deactivates the controls and dispenser lever. To turn off the ice maker, see the “Ice Maker and Storage Bin” section in the Owner’s Manual.

• Press and hold Lock for 3 seconds to lock the dispenser.
• Press and hold Light a second time to unlock the dispenser.
  The display screen indicates when the dispenser is locked.
  

Online Ordering Information

For detailed installation instruction and maintenance information, winter storage, and transportation tips, please see the Owner’s Manual included with your appliance.
For information on any of the following items, a full-cycle guide, detailed product dimensions, or for complete instructions for use and installation, please visit https://www.whirlpool.com/owners, or in Canada https://www.whirlpool.ca/owners. This may save you the cost of a service call. However, if you need to contact use the information listed below for the appropriate region.

SAVE THESE INSTRUCTIONS

W11396838A
W11396854A-SP

®/™ ©2020 Whirlpool. All rights reserved.
Used under license in Canada.

Documents / Resources