KLONDIKE Long Life ISO 46 Turbine oil are advanced, specialized fluids designed to provide exceptional lubrication and cooling benefits for industrial turbine systems where the highest quality rust and oxidation inhibited lubricants are required. Designed and recommended for use in turbine systems operating on steam or gas as well as a high temperature bearing lubricant and coolant. This oil is formulated to meet the demands of non-geared steam, hydro-electric, and gas turbines as well as a bearing lubricant.
KLONDIKE Long Life ISO 46 Turbine oil protects vital equipment parts from rust and corrosion both during operational service and when equipment is idle making this fluid extremely versatile. In addition, this product passes the ASTM-D-943 Turbine Oil Stability Test by more than 10,000 hours indicating its ability to provide extremely long service life.
MAG Turbo Cyclone ISO VG 46 are manufactured from the highest quality hydrotreated /hydrocracked base
oil fortified with a proprietary ashless additive package. The state of the art additive system offers outstanding
protection against oxidation, gives long-term corrosion protection, and helps retain good oil demulsibility in
the presence of water.
Download
- High oxidation stability.
- Good thermal stability.
- Excellent hydrolytic stability.
- No sludge formation.
- Good protection against corrosion of steel and non-ferrous metals.
- Good foam behaviour.
BENEFITS
- DIN - 51515 Part 1: L-TD & Part 2: L-TG
- Alstom - HTGD 90117 V0001 S
- British Standard - BS 489
- ISO - 8068
- Westinghouse
Electric Corp. - Meet Specifications
- General Electric - GEK 32568 A/C
- CEGB Standard - 207001
- US Steel - 120
- US Military - MIL-L-17672 D
- Siemens - TLV 9013 04 and TLV 9013 01
- Brown Boveri- HTGD 90117
Performance Level
Application Of Use
MAG Turbo Cyclone ISO VG 46 have a number of vital functions to perform. It must lubricate and cool the turbine and generator bearings, couplings and reduction gears as well as protect the system from rust, corrosion, and oxidation. MAG Turbo Cyclone ISO VG 46 are recommended to be applied for lubrication of Industrial steam turbines, Industrial gas turbines, & Power generation combined cycle turbines.
Typical Technical Properties
ISO VG | 46 | ||
Color | ASTM D-1500 | – | 1.0 |
Density @ 25 °C | ASTM D-4052 | g/cc | 0.856 |
Kinematic Viscosity @40°C | ASTM D-7042 | cst | 46 |
Kinematic Viscosity @100°C | ASTM D-7042 | cst | 7.00 |
Viscosity Index | ASTM D-2270 | – | 107 |
Pour Point | ASTM D-6749 | °C | -33 |
Flash Point, (COC) | ASTM D-92 | °C | 240 |
Demulsibility @54°C | ASTM D-1401 | Minutes | 9 |
Foaming Sequence I | ASTM D-892 | ml / ml | 10 / 0 |
Foaming Sequence II | ASTM D-892 | ml / ml | 20 / 0 |
Foaming Sequence III | ASTM D-892 | ml / ml | 10 / 0 |
Acid Value – TAN | ASTM D-974 | mg KOH/g | 0.15 |
Back
Phillips 66® Turbine Oil is a very high-quality, rust and oxidation (R&O)-inhibited circulating oil developed for use in industrial steam turbines, rotary air compressors, and many other industrial applications. It is specially formulated to protect against sludge and varnish formation to provide long service life.LONG-LIFE, RUST & OXIDATION-INHIBITED
Links of Interest
- Product Data Sheet
- Safety Data Sheet
- Warranty Information
Features & Benefits
- Excellent oxidation resistance and thermal stability for long service life
- Protects against sludge and varnish formation
- Protects against rust and corrosion
- Excellent water-separating properties
- Low carbon-forming tendency for use in air compressors
- Good foam resistance
Applications
- Direct-drive steam turbines and hydroelectric turbines
- Air tools and other pneumatic equipment lubricated through air line lubricators
- Centrifugal and rotary air compressors
- Lightly loaded enclosed gear drives where the OEM specifies a R&O type oil (ISO VG 68, 100)
- Electric motor bearings, fan bearings, and blower bearings
- Vacuum pumps, deep-well water pumps, and machine tools
Technical Details
- ISO Grade: 32
- ISO Grade: 46
- ISO Grade: 68
- ISO Grade:100
- ISO Grade: 32
- ISO Grade: 46
- ISO Grade: 68
- ISO Grade:100
Licenses & Approvals
Turbine Oil meets the requirements of the following industry and OEM specifications:#ABB G12106#Alstom Power HTGD 90 117, for turbines without gear drives#Ansaldo Energia AE94.3A & AE94.2 without gear drives (ISO VG 46) (approved)#ANSI/AGMA Standard 9005-E02, R&O Inhibited Oils#ASTM D4304-06a, Type I Turbine Oil#British Standard 489#China National Standard GB 11120-2011 L-TSA (ISO VG 32 & 68) (approved)#Denison Hydraulics HF-1#DIN 51515 Part 1, Lubricating Oils, Type L-TD#DIN 51517 Part 2, Lubricating Oils, Type CL#DIN 51524 Part 1, Hydraulic Oils, Type HL#General Electric GEK 46506e, GEK 32568l, GEK 121608, GEK 27070 (obsolete), GEK 28143b (obsolete), GEK 120498 (obsolete)#Siemens Power Generation TLV 9013 04, TLV 9013 05#U.S. Military MIL-PRF-17672D, Symbol 2075 T-H (ISO VG 32), 2110 T-H (ISO VG 46), 2135 T-H (ISO VG 68)#U.S. Steel 126
Additional Details
ISO Grade | 32 |
Specific Gravity @ 60°F | 0.862 |
Density, lbs/gal @ 60°F | 7.18 |
Color, ASTM D1500 | 0.5 |
Flash Point (COC), °C (°F), ASTM D92 | 220 (428) |
Pour Point, °C (°F), ASTM D97 | -40 (-40) |
Viscosity, ASTM D445 | |
cSt @ 40°C | 31.8 |
cSt @ 100°C | 5.4 |
Viscosity Index, ASTM D2270 | 106 |
Acid Number, ASTM D974, mg KOH/g | 0.04 |
Air Release, ASTM D3427, minutes | 3.0 |
Copper Corrosion, ASTM D130, 3 hrs @ 100°C | 1a |
Demulsibility, ASTM D1401, minutes to pass | 20 |
Foam Test, ASTM D892, Seq. I, mL | 0/0 |
Foam Test, ASTM D892, Seq. II, mL | 0/0 |
Foam Test, ASTM D892, Seq. III, mL | 0/0 |
Oxidation Stability | |
TOST, ASTM D943-04a, hours | >10000 |
RPVOT, ASTM D2272, minutes | >1550 |
Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals
Turbine Oil meets the requirements of the following industry and OEM specifications:#ABB G12106#Alstom Power HTGD 90 117, for turbines without gear drives#Ansaldo Energia AE94.3A & AE94.2 without gear drives (ISO VG 46) (approved)#ANSI/AGMA Standard 9005-E02, R&O Inhibited Oils#ASTM D4304-06a, Type I Turbine Oil#British Standard 489#China National Standard GB 11120-2011 L-TSA (ISO VG 32 & 68) (approved)#Denison Hydraulics HF-1#DIN 51515 Part 1, Lubricating Oils, Type L-TD#DIN 51517 Part 2, Lubricating Oils, Type CL#DIN 51524 Part 1, Hydraulic Oils, Type HL#General Electric GEK 46506e, GEK 32568l, GEK 121608, GEK 27070 (obsolete), GEK 28143b (obsolete), GEK 120498 (obsolete)#Siemens Power Generation TLV 9013 04, TLV 9013 05#U.S. Military MIL-PRF-17672D, Symbol 2075 T-H (ISO VG 32), 2110 T-H (ISO VG 46), 2135 T-H (ISO VG 68)#U.S. Steel 126
Additional Details
ISO Grade | 46 |
Specific Gravity @ 60°F | 0.868 |
Density, lbs/gal @ 60°F | 7.23 |
Color, ASTM D1500 | 0.5 |
Flash Point (COC), °C (°F), ASTM D92 | 232 (450) |
Pour Point, °C (°F). ASTM D97 | -40 (-40) |
Viscosity, ASTM D445 | |
cSt @ 40°C | 46.0 |
cSt @ 100°C | 6.7 |
Viscosity Index, ASTM D2270 | 102 |
Acid Number, ASTM D974, mg KOH/g | 0.04 |
Air Release, ASTM D3427, minutes | 3.0 |
Copper Corrosion, ASTM D130, 3 hrs @ 100°C | 1a |
Demulsibility, ASTM D1401, minutes to pass | 20 |
Foam Test, ASTM D892, Seq. I, mL | 0/0 |
Foam Test, ASTM D892, Seq. II, mL | 0/0 |
Foam Test, ASTM D892, Seq. III, mL | 0/0 |
Oxidation Stability | |
TOST, ASTM D943-04a, hours | >10000 |
RPVOT, ASTM D2272, minutes | >1500 |
Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals
Turbine Oil meets the requirements of the following industry and OEM specifications:#ABB G12106#Alstom Power HTGD 90 117, for turbines without gear drives#Ansaldo Energia AE94.3A & AE94.2 without gear drives (ISO VG 46) (approved)#ANSI/AGMA Standard 9005-E02, R&O Inhibited Oils#ASTM D4304-06a, Type I Turbine Oil#British Standard 489#China National Standard GB 11120-2011 L-TSA (ISO VG 32 & 68) (approved)#Denison Hydraulics HF-1#DIN 51515 Part 1, Lubricating Oils, Type L-TD#DIN 51517 Part 2, Lubricating Oils, Type CL#DIN 51524 Part 1, Hydraulic Oils, Type HL#General Electric GEK 46506e, GEK 32568l, GEK 121608, GEK 27070 (obsolete), GEK 28143b (obsolete), GEK 120498 (obsolete)#Siemens Power Generation TLV 9013 04, TLV 9013 05#U.S. Military MIL-PRF-17672D, Symbol 2075 T-H (ISO VG 32), 2110 T-H (ISO VG 46), 2135 T-H (ISO VG 68)#U.S. Steel 126
Additional Details
ISO Grade | 68 |
Specific Gravity @ 60°F | 0.871 |
Density, lbs/gal @ 60°F | 7.25 |
Color, ASTM D1500 | 0.5 |
Flash Point (COC), °C (°F), ASTM D92 | 243 (469) |
Pour Point, °C (°F), ASTM D97 | -34 (-29) |
Viscosity, ASTM D445 | |
cSt @ 40°C | 68.0 |
cSt @ 100°C | 8.8 |
Viscosity Index, ASTM D2270 | 100 |
Acid Number, ASTM D974, mg KOH/g | 0.04 |
Air Release, ASTM D3427, minutes | 4.0 |
Copper Corrosion, ASTM D130, 3 hrs @ 100°C | 1a |
Demulsibility, ASTM D1401, minutes to pass | 20 |
Foam Test, ASTM D892, Seq. I, mL | 0/0 |
Foam Test, ASTM D892, Seq. II, mL | 0/0 |
Foam Test, ASTM D892, Seq. III, mL | 0/0 |
Oxidation Stability | |
TOST, ASTM D943-04a, hours | >10000 |
RPVOT, ASTM D2272, minutes | >1000 |
Rust Test, ASTM D665 A&B | Pass |
Licenses & Approvals
Turbine Oil meets the requirements of the following industry and OEM specifications:#ABB G12106#Alstom Power HTGD 90 117, for turbines without gear drives#Ansaldo Energia AE94.3A & AE94.2 without gear drives (ISO VG 46) (approved)#ANSI/AGMA Standard 9005-E02, R&O Inhibited Oils#ASTM D4304-06a, Type I Turbine Oil#British Standard 489#China National Standard GB 11120-2011 L-TSA (ISO VG 32 & 68) (approved)#Denison Hydraulics HF-1#DIN 51515 Part 1, Lubricating Oils, Type L-TD#DIN 51517 Part 2, Lubricating Oils, Type CL#DIN 51524 Part 1, Hydraulic Oils, Type HL#General Electric GEK 46506e, GEK 32568l, GEK 121608, GEK 27070 (obsolete), GEK 28143b (obsolete), GEK 120498 (obsolete)#Siemens Power Generation TLV 9013 04, TLV 9013 05#U.S. Military MIL-PRF-17672D, Symbol 2075 T-H (ISO VG 32), 2110 T-H (ISO VG 46), 2135 T-H (ISO VG 68)#U.S. Steel 126
Additional Details
ISO Grade | 100 |
Specific Gravity @ 60°F | 0.874 |
Density, lbs/gal @ 60°F | 7.28 |
Color, ASTM D1500 | 0.5 |
Flash Point (COC), °C (°F), ASTM D92 | 277 (531) |
Pour Point, °C (°F), ASTM D97 | -27 (-17) |
Viscosity, ASTM D445 | |
cSt @ 40°C | 100 |
cSt @ 100°C | 11.3 |
Viscosity Index, ASTM D2270 | 100 |
Acid Number, ASTM D974, mg KOH/g | 0.04 |
Air Release, ASTM D3427, minutes | 4.0 |
Copper Corrosion, ASTM D130, 3 hrs @ 100°C | 1a |
Demulsibility, ASTM D1401, minutes to pass | 25 |
Foam Test, ASTM D892, Seq. I, mL | 0/0 |
Foam Test, ASTM D892, Seq. II, mL | 0/0 |
Foam Test, ASTM D892, Seq. III, mL | 0/0 |
Oxidation Stability | |
TOST, ASTM D943-04a, hours | >10000 |
RPVOT, ASTM D2272, minutes | >800 |
Rust Test, ASTM D665 A&B | Pass |