How do you reset “Maintenance Light” Toyota Camry, reset Maintenance Light Toyota Camry on 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018. To reset maintenance light Toyota Camry and that can be made manually by use button on car dashboard.
To turning off Maintenance Light indicator light
Toyota Camry on 2007 2008 2009 2010 2011 2012 2013 2014 2015, conform to the following instructions:
- Turn the ignition to position On without starting the engine.(*)
- Press the odometer button until you see “TRIP A”
- Turn the ignition “off”
- Press and hold the Trip Odometer Reset button, and turn the ignition switch to the “On” position (*)
- Hold down the Trip Odometer Reset button until “000000” MILES appears on the display and the maintenance light turns off.
(*)=If your car has START push-button , press the “Start” twice without touching the brake pedal.
To turning off
Maintenance Light indicator light
Toyota Camry on 2002 2003 2004 2005 2006, conform to the following instructions:
- Turn the ignition to position On without starting the engine.(*)
- Press the odometer button until you see “ODO”
- Turn the ignition “off”
- Press and hold the Trip Odometer Reset button, and turn the ignition switch to the “On” position (*)
- Hold down the Trip Odometer Reset button until “000000” MILES appears on the display and the maintenance light turns off.
(*)=If your car has START push-button , press the “Start” twice without touching the brake pedal.
Toyota Camry reset maintenance Light indicator
This reset should be done after changed the engine oil and filter according to the technical specifications relating Toyota Camry Engine. Resetting without changing the engine oil lead to premature engine wear and serious problems in the functioning of these.
Post navigation
This div height required for enabling the sticky sidebar
This website uses cookies to improve your experience. By using this website and agreeing to this Cookies Policy.Accept Read More
Tired of ads? Remove them as a Premium Member. Read more
May 14
2013 Toyota Camry
The 2013 Toyota Camry is offered in a hybrid gasoline model. After performing an oil change the maintenance data will need to be reset. Follow these steps to reset this light:
1. Turn the ignition to run (one position before starting engine).
2. Ensure trip meter reading A is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Continue to press and hold the knob until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
When doing the oil change and topping up fluids you will need to use the following specifications:
Engine Size | 4 Cyl. 2.5L Gas |
Motor Oil | 0W20 |
Oil Capacity w/Filter | 4.6 US qt. (4.4L) |
Brake Fluid | Dot 3 |
Engine Coolant | Toyota Super Long Life Coolant |
Automatic Transmission | Toyota Genuine ATF WS |
You can cross reference the following Purolator filter numbers for your own application:
Engine Size | 4 Cyl. 2.5L Gas |
Oil Filter | L25608 |
Air Filter | A25786 |
Cabin Filter | C35667 |