Select [Wi-Fi function]. (set Wi-Fi to Enable, then select Wi-Fi function
Press the <INFO> button. The general settings screen is displayed.
Select [Clear Wi-Fi settings]. Press the <V/> key to select [Clear Wi-Fi settings], then press <SET>.
Select [OK]. Select [OK] and press <SET>. Settings for [Wi-Fi function] are cleared and the menu screen will reappear.
Fonte: EOS 70D(w) Instruction Manual p149
Solution
Set up: Install Camera Connect on a smartphoneTo communicate with a smartphone, the dedicated smartphone application Camera Connect (free of charge) is necessary.
- Camera Connect can be downloaded from the App Store or Google Play.Install Camera Connect on the smartphone and then perform the procedures to establish the connection.
- To use Camera Connect, a smartphone on which iOS or Android is installed is necessary.
- When an NFC-enabled smartphone is touched to the camera before installing Camera Connect, the download screen of Camera Connect will be displayed on the smartphone.
IMPORTANT
- Please refer to the "Related information" section at the bottom of this page for specifications and system requirements of the smartphones which can be connected wirelessly.
- Interface or functions of Camera Connect are subject to change due to application improvements or updates.In such a case, features may differ from the sample screens or operation instructions shown here.
1. Turn on the camera and the smartphone.
2. Press the camera's <MENU> button to display the menu.
3. Press the <
4. Press the <
5. Press <
For an NFC-enabled smartphone, press the < DISP. > button to add [
REFERENCE
Smartphones labeled with the
NOTE
When this setting is selected for the first time, a screen to register a nickname (identification name) is displayed.
When the camera is connected to another device wirelessly, the nickname will be displayed on the device. Be sure to set a nickname as otherwise you cannot set the wireless functions.
Select [OK] and enter a nickname. (You can enter between 1 to 10 characters.)
When you are finished, press the < MENU > button.
Select [OK] on the confirmation dialog and press <
* For details on how to use the keyboard, refer to " Operation Reference: Virtual Keyboard Operation ".
The basic setup is now complete.The steps after this differ depending on the connection method.
Step 2-A: Connect the camera and smartphone (Connect via NFC)
1. Touch a smartphone to the camera.
Camera Connect starts on the smartphone and establishes a connection.
The camera's <
When a message indicating the connection is displayed on the camera's LCD monitor, move the smartphone away from the camera.
When a connection is established, the screen below will appear on the camera's LCD monitor.*
The camera's <
* When connecting to the same smartphone, this screen will not appear again.
2. Save the connection settings.
Press <
After a message is displayed, the camera's LCD monitor will turn off.
After the camera operation is complete, the main window of Camera Connect will be displayed on the smartphone.
IMPORTANT
NOTE
- The camera cannot be connected to two or more smartphones at the same time.
- By default, the connection settings via the NFC function are saved as the fourth setting (a setting dedicated to NFC connection) under the name [SET4(NFC)].When you connect the camera to another smartphone via NFC, [SET4(NFC)] will be overwritten.
- While connected, the camera's Auto power off does not function.
- NFC-enabled smartphones can also be connected by selecting [Easy connection] or [Select a network].
- You can check or change the device name on the setting screen of Camera Connect.
Step 2-B: Connect the camera and smartphone (Connect wirelessly)
1. Under the [
2. Press <
3. Press the <
4. Press the <
The camera's <
5. Press the <
Select [OK] and press <
6. Operate the smartphone and connect it to the camera.
NOTE
When connecting by selecting [Easy connection], "_Canon0A" is displayed at the end of the SSID.
7. When the screen below is displayed, start Camera Connect on the smartphone.
8. Select and touch the camera to connect to from [Cameras] on Camera Connect.
When a connection is established, the screen below will appear on the camera's LCD monitor.
9. Press <
The camera's <
After a message is displayed, the camera's LCD monitor will turn off.
After the camera operation is complete, the main window of Camera Connect will be displayed on the smartphone.
10. Operate the camera using Camera Connect.
Step 3: View and save images on the smartphone
1. On the Camera Connect menu screen on the smartphone, choose [Images on camera].
2. Use your smartphone to save images from the camera to the smartphone.
When the camera and smartphone are connected, a list of images in the camera appears in "Camera Connect".Tap the [
3. When the selection screen appears, select the images you wish to save (
The selected images are saved to the smartphone.
4. When the images have been saved, tap the home button on the top left to return to the menu screen.
5. To end the connection, tap the [
Sending images to a smartphone via wireless LAN is now complete.
* Android™ and Google Play™ are trademarks of Google Inc.
IMPORTANT
- When you specify viewable images, the Camera Connect functions are restricted.
- While connected, a picture cannot be taken even if the camera's shutter button is pressed.
- Depending on the connection status, image display may become slower.
NOTE
camera are being saved to a smartphone.
Operation Reference: Virtual Keyboard Operation
For details on keyboard operation when registering a nickname (identification name) of the camera, refer to the following.
You can change the nickname later on the [General sett.] screen.