Instructions on how to set up the 3 most common settings in the Honeywell T-6 Thermostat. Hello, my name is Joe. I am a Sales Representative and former Maintenance Technician at Standard Heating & Air Conditioning. Today I am going to show you how to set up the 3 most common settings on your Honeywell T-6 Programmable Thermostat. For further instructions on other thermostat settings and how to use a Honeywell thermostat, please refer to the user manual provided when your installation took place. Or call us anytime at either the Minneapolis location:
(612) 324-1015, or the St. Paul location: (612) 324-1015. Thank you for
choosing Standard Heating & Air Conditioning, have a great day!Honeywell T-6 Programmable Thermostat
T-6 Programmable Honeywell Thermostat Setup
1. System Setting
2. Temperature
3. Scheduling Preferences
Thank You
To Set your schedule:
Touch MENU on the thermostat display, select SCHEDULE
Each Day / Period will be displayed. Touch SELECT to edit each period.
Touch the TIME displayed and use the +/ - icons to adjust the start time for the desired period (adjustable in 15-minute increments). Touch the TEMPERATURE displayed to adjust the desired heating or cooling temperature (Touch the TEMPERATURE display again to alternate between the cooling and heating temperature setting) Press SELECT when complete.
After adjusting the TEMPERATURE and TIME for each schedule day and period, DONE will be displayed on the screen. Touch SELECT to save your new schedule
To Modify your schedule:
Touch MENU on the thermostat display, select SCHEDULE
Each Day / Period will be displayed. Touch < or > to locate the desired period you wish to edit.
Touch SELECT to edit each period.
Touch the TIME displayed and use the +/ - icons to adjust the start time for the desired period (adjustable in 15-minute increments). Touch the TEMPERATURE displayed to adjust the desired heating or cooling temperature (Touch the TEMPERATURE display again to alternate between the cooling and heating temperature setting) Touch SELECT when complete.
Touch the > icon until DONE is displayed. Touch SELECT to save your settings.
Press up or down to immediately adjust the temperature. This will temporarily override the temperature setting for the current time period. “Temporary” will appear on the display and the current program period will flash. The new temperature will be used until the next period begins.
To permanently ignore the schedule, press up or down until the desired temperature is displayed. Then, press the Hold button to maintain the new temperature indefinitely. The word Hold will appear on the screen.
Press the Run button if you wish to cancel either override and resume the schedule. The word Hold will disappear and the thermostat will be set to the temperature programmed for the current period. Also ensure that the heat - off - cool switch is set to the desired run mode.
Remember, after you set the desired setpoint and select your desired hold the thermostat will change back from displaying your setpoint to the room temperature. This is normal. Allow your heating or cooling system to reach your setpoint over time.